CUTTING OIL EMULSIFIER NIPRO-P45
Nipro Emulsifier P-45 is a high quality emulsifier that is used to emulsify oils like SN70, SN100, SN120, LLP, TOBS etc. P-45 is used in a ratio of 15-20% with the oil to make a milky emulsion that is stable at 400 ppm CaCO3.
The Cutting Oil made from the use of Emulsifier P-45 with high quality base oils shall have good rust prevention and bactericide properties.
|1. Appearance||Clear Amber fluid|
|2. Specific Gravity@29 °C||1.05|
|3. Flash Point (COC) °C||150 min|
|4. Viscosity @40 °C||60 cSt min|
|5. Ph for 5% emulsion||9 min.|