NIPRO TECHNOLOGIES LTD.

making oils.....soluble

 

HOME EMULSIFIERS CUTTING OILS OILS CONTACT US

NIPRO EMULSIFIER-P35

EMULSIFIER FOR CUTTING OIL NIPRO -P35 

This emulsifier package is suitable for heavy base oils and shall give extra rust prevention properties as compared to the Emulsifier P-25 package. The package is added with extra additives that allow the final product to work at greater temperatures and water hardness levels.

 

Nipro Emulsifier P-43 is a high quality emulsifier that is used to emulsify oils like SN70 and TOBS. P-35 is used in a ratio of 15-20% with the oil to make a milky emulsion that is stable at 400 ppm CaCO3.  

Application:The Cutting Oil made from the use of Emulsifier P-35 with high quality base oils shall have good rust prevention and bactericide properties.  

Technical Specifications 

1. Appearance Clear Amber fluid
2. Specific Gravity@29 °C 1.05
3. Flash Point (COC) °C 150 min
4. Viscosity @40 °C 60 cSt min
5. Ph for 5% emulsion 9 min.

 

 

 

 

Emulsifiers for soluble oils

Rust Preventive Oils

Rust Preventive Oils

Rust Preventive Oil

Pine Oil

Concrete Mould Releasing Oil

Copper,Sulfate Pentahydrate

Orchard Spray Oil

Fish Oil Soap

SN 70 & SN 150

Rosin Soap

Cutting Oil HM1

Cutting Oil HM2

Rust Preventive Oil DW 1

Shuttering Oil

Transformer Oil

Calcium Petroleum Sulfonates

Sodium Petroleum Sulfonates

Cutting Oil HM3

Cutting Oil Emulsifier P15

Cutting Oil Emulsifier P25

Cutting Oil Emulsifier P35

Cutting Oil Emulsifier P45